RI(ICE)-LBD2DR1 L-Band Receiver/ Base Band Converter For Use With PIC5 or PIC6   ***NEW***

	Input 900MHz to 2200 MHz
	Input VGA For 80dB of Gain, (Input -77dBm to 10 dBm)
	Output 1MHz to 65MHz Bandwidth
	Uses Analog Devices AD9640 Complex A/D Converter For 14 Bit Complex Samples
	Multiple Clock Source-VCO Driven By 10Mhz  External Reference or 10MHz Ref or On-board
	External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
	For Use With ICE-PIC5/PIC6 Series Of Cards or GIGEXD
	Cost: $2750-In Production

RI(ICE)-FLZRXDR1 400/800/1600 MBits/Sec Fiber Optic Module For Use With PIC6 or PIC5(**See Note)  ***NEW***

	6 Channel Fiber Optic Data Interface Module
	Bi-Directional Rx or Tx Operations
	400/800/1600/3200 Fiber Optic Data Rates
	This is a dual site module.
	Cost:$7000-In Production
	**Note-Use With PIC5 Limits Optical Interface To Only 4 Ports At 800 or 2 Ports At 1600 MBits/Sec

  RI(ICE)-A2DR4  Analog to Digital Converter Module 

	One Analog Devices AD6644
	14-bit 65 MSPS A/D Converter (AC coupled, 1Vp-p, 50ohm)
	External (AC coupled 1Vp-p), Internal 40Mhz/N, or socketed crystal clock - software selectable.
	Cost: $500-In Production

  RI(ICE)-A2DR5 Analog to Digital Converter Module

	Uses One Analog Devices AD9432
	12-bit 105 MSPS A/D Converter With Sampling Range Of 1 MSPS To 105 MSPS
	Jumper Selectable DC or AC Coupling 1Vp-p, 50 Ohm Terminated
	SMB Connector For External Clock Reference Derived Via A Comparator-AC coupled 1Vp-p.
	Oscillator Socket For User Supplied Clock, Jumper Selectable With External Comparator Clock.
	Cost: $750-In Production

	Uses Analog Devices AD9054
	8-bit 200 MSPS A/D Converter 1Vp-p Analog Input Range
	External clock derived via a comparator-AC coupled 1Vp-p.
	Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
	Data Output As Two "Married" 8 Bit Samples At 1/2 Sampling Frequency

Cost: $750-In Production

	Uses Analog Devices AD6645
	14-bit 105 MSPS A/D Converter 1Vp-p Analog Input Range
	Jumper Selectable AC or DC Coupled Analog Input
	External clock derived via a comparator-AC coupled 1Vp-p.
	Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
	External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
	Over/Underflow Output On Data Bit 1 Of 16 Bit Word (14 Bit Data MSB Aligned)

Cost: $750-In Production

	Uses Texas Instruments ADS5424
	14-bit 105 MSPS A/D Converter 1Vp-p Analog Input Range
	Jumper Selectable AC or DC Coupled Analog Input
	External clock derived via a comparator-AC coupled 1Vp-p.
	Oscillator Socket: For User Supplied Clock, Jumper Selectable With External Comparator Clock
	External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
	Over/Underflow Output On Data Bit 1 Of 16 Bit Word (14 Bit Data MSB Aligned)
	For Use With ICE-PIC5 PCI Cards ONLY (not compatible with PIC4 series)

Cost: $750-In Production

	Uses Texas Instruments ADS5444 A/D Converter
	13 Bit  250Mhz A/D Converter
	AC Coupled, Up to 10X Variable Gain Input Stage-Ideal For Connecting To RF Receivers
	External Connector For 1-ppS TTL Input-Stored In Bit 0 Of 16 Bit Word (14 Bit Data MSB Aligned)
	Multiple Clock Source-Direct  External Clock  Drive Using 1Vp-p Input Signal, User Supplied On Board 14 Pin Package Oscillator, Clock Synthesizer From Ext. 10MHz Ref or On-board 10MHz Ref.
	For Use With ICE-PIC5 Series Of Cards
	Cost: $1000-In Production

	Current NDA temporarily restricts rumeL, Inc from Listing Part Number or Manufacturer
	12 Bit 500MHz A/D Converter
	AC Coupled 1Vp-p Max Input
	Multiple Clock Source-Direct  External Clock  Drive Using 1Vp-p Input Signal, User Supplied On Board 14 Pin Package Oscillator, Clock Synthesizer From Ext. 20MHz Ref or On-board 20MHz Ref.
	Requires No Extra Heat Sinking or Fans
	For Use With ICE-PIC5 Series Of Cards
	Cost: $1500-In Production

	Uses National Semiconductor  ADC08D1500 A/D Converter
	8 Bit 1.5 GHz A/D Converter
	AC Coupled 1Vp-p Max Input, Analog Bandwidth 3dB Cutoff at 30Mhz & 1.8GHz
	3 Clock Source Options
	(1) Direct  External Clock  Drive Using 1Vp-p Input Signal
	(2) Clock Synthesizer From Ext. 10MHz Ref
	(3) Clock Synthesizer From  On-board 10MHz Ref.
	Requires No Extra Heat Sinking or Fans
	For Use With ICE-PIC5X or PIC5E PCI Cards (PIC5X Limited To 500 MBytes/Sec, PIC5E No Limitation-Full Rates)
	Dual Site Module-Uses Both I/O Ports Of ICE Hardware
	Cost: $3500-In Production

	One Analog Devices AD9754 14-bit 125MSPS D/A converter (AC coupled, 1Vp-p, 50ohm)
	External (Jumper Selectable DC or AC coupled 1Vp-p), Internal 40Mhz/N, or socketed crystal clock - software selectable.
	On Board Potentiometer For Gain Control.
	Cost: $750-In Production

	Complement Of The RI(ICE)-A2DR9 And RI(ICE)-A2DR10
	One Analog Devices AD9726 16-bit 400MSPS D/A converter (AC coupled, 1Vp-p, 50ohm)
	Multiple Clock Source-Direct  External Clock  Drive Using 1Vp-p Input Signal, User Supplied On Board 14 Pin Package Oscillator, Clock Synthesizer From Ext. 20MHz Ref or On-board 20MHz Ref.
	For Use On the ICE-PIC5 Series of Cards
	Note: ICE-PIC5 Capable Of 500MByte/Sec Throughput.  D2AR9 Can Be Used With 16 Bit Data Up To 250MHz Or Up To 400MHz With 8 Bit Data With ICE-PIC5 500MByte/Sec Limit
	Cost: $1000-In Production

RI(ICE)-TGSDDSxDR1   Network Interface Module-Supports 10GbE SDDS Protocol   ***NEW***

	Hooks directly to 10GbE  fiber optic network. For data acquisition/playback from/to a network at FULL 10GbE Rates.
	Supports Bidirectional Network communications in one module.
	Encapsulates UDP & IP protocols (stripped TCP/IP) in hardware.
	Supports ARP/RARP protocols for remote IP address receipt or user definable IP addresses.
	Conforms to 10GbE standards.
	X-Midas/Nextmidas and C user interfaces.
	Copper Interface:               P/N ICE-TGSDDSXD-Cu           (When Commercially Available)
	1310 nm Fiber Interface:   P/N ICE-TGSDDSXD-1300nm
	850 nm   Fiber Interface:   P/N  ICE-TGSDDSXD-850nm
	SFP Note: 1310nm  Is Standard.  At Time Of Order, Copper or  810nm MUST Be Specified If Either Is Desired.
	Cost: $3500 (Prototypes Located At Customers For Testing, Production Sept. 2009)
	For Use With PIC6 Cards Only

Copper   Interface Cost: $750    (In Production, For Use With PIC4 Series Of Cards Only)

850 nm   Interface Cost: $1000  (In Production, For Use With PIC4 Series Of Cards Only)

1310 nm Interface Cost: $1500  (In Production, For Use With PIC4 Series Of Cards Only

SFP        Interface Cost: $750     (In Production, For Use With PIC5 Series Of Cards Only

Sonet Interface Module For Use With PIC5 OR PIC4

Cost: $250-In Production

Cost: $7000-In Production